6-7
Cisco ASA 5500 Series Getting Started Guide
78-19186-01
Chapter 6 Connecting Interface Cables on the ASA 5500, ASA 5510, ASA 5520, and ASA 5540 Platforms
Connecting to a 4GE SSM
To connect to a 4GE SSM, perform the following steps:
Step 1 Connect to copper Ethernet ports to be used for network connections.
a. Connect one end of an Ethernet cable to a copper Ethernet port.
b. Connect the other end of the Ethernet cable to a network device, such as a
router, switch or hub.
To Next Page
Loading...
