Contents
viii
Cisco ASA 5500 Series Getting Started Guide
78-19186-01
Specifying Hosts and Networks 12-9
Viewing VPN Attributes and Completing the Wizard 12-10
Configuring the Other Side of the VPN Connection 12-12
What to Do Next 12-13
CHAPTER
13 Configuring the AIP SSM 13-1
Understanding the AIP SSM 13-2
How the AIP SSM Works with the Adaptive Security Appliance 13-2
Operating Modes 13-3
Using Virtual Sensors 13-4
Configuring the AIP SSM 13-6
AIP SSM Procedure Overview 13-6
Sessioning to the AIP SSM 13-6
Configuring the Security Policy on the AIP SSM 13-8
Assigning Virtual Sensors to Security Contexts 13-9
Diverting Traffic to the AIP SSM 13-11
What to Do Next 13-14
CHAPTER
14 Configuring the CSC SSM 14-1
About the CSC SSM 14-1
About Deploying the Adaptive Security Appliance with the CSC SSM 14-2
Scenario: Security Appliance with CSC SSM Deployed for Content Security 14-4
Configuration Requirements 14-5
Configuring the CSC SSM for Content Security 14-6
Obtain Software Activation Key from Cisco.com 14-6
Gather Information 14-7
Verify Time Settings 14-7
Run the CSC Setup Wizard 14-8
What to Do Next 14-17
To Next Page
Loading...
