Do you have a question about the Cisco ASA 5545-X and is the answer not in the manual?
Power Supply | Dual, Hot-swappable |
---|---|
Memory | 8 GB |
Flash Memory | 8 GB |
AC Input Voltage | 100-240 VAC |
Form Factor | 1 RU |
Number of VLANs | 1024 |
Security Contexts | 50 |
Interfaces | 8 x Gigabit Ethernet |
Frequency | 50-60 Hz |
Dimensions (H x W x D) | 1.75 x 17.5 x 12 in (4.4 x 44.5 x 30.5 cm) |
High Availability | Active/Standby |
Storage | SSD (optional) |
Lists the main chassis component included in the package.
Details the console cable and adapter for connecting to the device.
Specifies the power cord and retainer included in the package.
Lists the different types of screws provided for rack mounting.
Explains different license types for the ASA, including Base, Security Plus, and AnyConnect.
Describes licensing for the ASA FirePOWER module, including Control and Protection.
Describes the network setup and goals for configuring the ASA FirePOWER module.
Step-by-step guide to configure the ASA FirePOWER module via the console port.
Details the configuration commands for various interfaces like GigabitEthernet and bridge groups.
Details the procedure to launch the Cisco ASDM application using a web browser.
Explains how to use the ASDM Startup Wizard for basic ASA FirePOWER configuration.
Guides on obtaining and installing license keys for the ASA FirePOWER module.
Describes how to set up traffic inspection rules and service policies for the FirePOWER module.