28-31
Cisco ASA 5500 Series Configuration Guide using ASDM
OL-20339-01
Chapter 28 Configuring Twice NAT
Configuration Examples for Twice NAT
Figure 28-63 Defining the Server Address
c.
Choose the new network object by double-clicking it. Click OK to return to the NAT configuration.
Figure 28-64 Choosing the New Network Object
Step 5
For the Original Service, click the browse button to add a new service object for Telnet in the Browse
Original Service dialog box.
a. Add the new service object.
Figure 28-65 Adding a New Service Object for Telnet
b.
Define the protocol and port, and click OK.
To Next Page
Loading...
