4-43
Cisco ASA 5585-X Adaptive Security Appliance Hardware Installation Guide
OL-22567-02
Chapter 4 Maintenance and Upgrade Procedures
Troubleshooting Loose Connections
Troubleshooting Loose Connections
Perform the following actions to troubleshoot loose connections on adaptive security appliances:
• Make sure all power cords are securely connected.
• Make sure all cables are properly aligned and securely connected for all external and
internal components.
• Remove and check all data and power cables for damage. Make sure no cables have bent pins or
damaged connectors.
• Make sure each connector is properly seated.
• If a device has latches, make sure they are completely closed and locked.
• Check any interlock or interconnect indicators that indicate a component is not connected properly.
• If problems continue, remove and re-install each connector, checking the connectors and sockets for
bent pins or other damage.
To Next Page
Loading...
