Cisco ASR-920-4SZ-D User Manual

Domain d1, Service s1: notify REP, EFD not triggered
ID Interface SrvcInst Defect Threshold Triggered?
---- ---------- -------- ------------- ------------- ----------
4 Te0/0/12 N/A None DefMACstatus No
This example shows the CFM EFD MEP information when a fault is detected.
Router# show ethernet cfm efd meps | sec ring1
Domain dom1_ring1, Service ser1_ring1: notify REP, EFD not triggered
ID Interface SrvcInst Defect Threshold Triggered?
---- --------- -------- ------- --------- ----------
3 Te0/0/12 NA None DefMACstatus No
Additional References
Related Documents
Document TitleRelated Topic
Cisco IOS Master Command List , All ReleasesCisco IOS master command list
Carrier Ethernet Configuration Guide, Cisco IOS XE
Release (Cisco ASR 900 Series)
Carrier Ethernet Configuration Guide, Cisco IOS XE
Release (Cisco ASR 900 Series)
Standards
TitleStandard
--No new or modified standards are supported, and
support for existing standards has not been modified.
MIBs
MIBs LinkMIB
To locate and download MIBs for selected platforms,
Cisco IOS releases, and feature sets, use Cisco MIB
Locator found at the following URL:
http://www.cisco.com/go/mibs
No new or modified MIBs are supported, and support
for existing MIBs has not been modified.
RFCs
TitleRFC
--No new or modified RFCs are supported, and support
for existing RFCs has not been modified.
LAN Switching Configuration Guide Cisco IOS XE Everest 16.5.1 (Cisco ASR 900 Series)
7
REP Access Gateway
Additional References

Cisco ASR-920-4SZ-D Specifications

General

Brand	Cisco
Model	ASR-920-4SZ-D
Category	Network Router
Language	English