To Next PageTo Next PageWhy is port in down state on my Cisco ASR-920-24SZ-IM?
A port may be in a down state because the environmental sensor threshold has exceeded a critical level (voltage, temperature). Check the environmental sensors and ensure they are operating within the specified limits.
What to do if port is administratively shut down on Cisco ASR-920-24SZ-IM?
If a port on your Cisco Network Router is administratively shut down, re-enable it via the administrative settings.
General| Model | ASR-920-24SZ-IM |
|---|---|
| Product Series | ASR 900 Series |
| Form Factor | Fixed |
| Rack Height | 1 RU |
| Operating System | Cisco IOS XE |
| DRAM | 4GB |
| Flash Memory | 4GB |
| Interfaces | Ethernet, SFP+ |
| Power Supply | Dual AC or DC power supply |
| Dimensions (H x W x D) | 1.75 x 17.5 x 14 in |
| Weight | 17.6 lbs |
| Operating Temperature | 0 to 40 °C |
| Storage Temperature | -40 to 70°C |
| Operating Humidity | 5 to 95% non-condensing |
| MTBF | 200, 000 hours |
Features and specifications of the Cisco ASR 920 Series Aggregation Services Routers.
Essential safety guidelines for installing the Cisco ASR 920 series routers to prevent injury or damage.
Detailed procedures to prevent Electrostatic Discharge (ESD) damage to the router and its components.
Step-by-step instructions for mounting the Cisco ASR 920 series router chassis into a rack.
Covers the installation of both DC and AC power supplies for the Cisco ASR 920 series routers.
Steps to power on the Cisco ASR 920 series router and observe the initialization process.
