Cisco ASR 9901 User Manual

Figure 35: CAB-HV-25A-SG-IN3 Power Cord
Cisco ASR 9001
AC power modules operate in the input range of 100 VAC to 240 VAC, 50 to 60 Hz and require a minimum
service of:
• 15 A for operation in North America and Japan
• 10 A for international operation
• 13 A for operation in the UK
Each of the AC power inputs requires a separate dedicated branch circuit. For a list of the nominal and
acceptable value ranges for source AC power, see AC Input Voltage Range.
The following table lists the AC-input power cord options, specifications, and Cisco product numbers for the
Cisco ASR 9001 AC-input power supply modules. This table also references power cord illustrations. For
more information on Cisco product numbers (PIDs) and their detailed description of power cords, refer to
Dynamic Configuration Tool.
Table 2: AC-Input Power Cord Options for ASR 9001 Router
Power Cord RatingLengthPart NumberLocale
15 A, 250 V8.2 feet (2.5 m)CAB-ACUSA
15 A, 250 V8.2 feet (2.5 m)CAB-L620P-C13-JPNJapan
10 A, 250 V8.2 feet (2.5 m)CAB-ACAAustralia
10 A, 250 V8.2 feet (2.5 m)CAB-ACIItaly
10 A, 250 V8.2 feet (2.5 m)CAB-ACRArgentina
10 A, 250 V8.2 feet (2.5 m)CAB-ACSSwitzerland
13 A, 250 V8.2 feet (2.5 m)CAB-ACUUK
10 A, 250 V8.2 feet (2.5 m)CAB-ACCChina
10 A, 250 V8.2 feet (2.5 m)CAB-ACSASouth Africa/India
Preparing for Installation
26
Preparing for Installation
AC Powered Routers

Cisco ASR 9901 Specifications

General

Chassis Height	1 RU
Rack Mounting	Yes
Redundancy	Yes
Operating System	Cisco IOS XR
Switching Capacity	Up to 1.2 Tbps
Memory	16 GB
Power Supply	Dual redundant AC or DC
Interfaces	10GE, 100GE
Operating Temperature	0 to 40°C (32 to 104°F)
Input Voltage	100-240V AC
Power Consumption	Varies based on configuration
Storage	64 GB SSD
Humidity	5% to 95% (non-condensing)