Cisco ASR 9904 User Manual

Replacing Cisco ASR 9000 Series Router
Components
The router is equipped as ordered and is ready for installation and startup when it is shipped. As network
requirements change, you may need to upgrade the system by adding or changing components. This chapter
describes how to maintain router components.
• Prerequisites and Preparation, on page 1
• Replacing the Chassis Air Filter, on page 4
• Removing and Replacing the Fan Trays, on page 10
• Removing and Replacing Power System Components, on page 12
• Removing and Replacing Cards from the Chassis, on page 25
• Migrating from RP1 to RP2 Card, on page 27
• Migrating from RP2 to RP3 Card, on page 30
• Migrating from RSP440 to RSP880 or RSP880-LT Card , on page 33
• Migrating from RSP4-S to RSP880-LT Card (ASR 9906 Router), on page 36
• Migrating from RSP4/RSP4-S/RSP-L to RSP5 Card, on page 38
• Migrating from FC1 to FC2 Card, on page 41
• Migrating from A99-SFC2 to A99-SFC3 Card, on page 41
• Migrating from A99-SFC-S/A99-SFC-T to A99-SFC3-S/A99-SFC3-T Card, on page 42
• Removing a Chassis from the Equipment Rack, on page 43
• Installing a Replacement Chassis in the Equipment Rack, on page 44
• Packing a Chassis for Shipment, on page 44
Prerequisites and Preparation
Before you perform any of the procedures in this chapter, be sure that you:
• Review the b-asr9k-hardware-installation-guide_chapter1.pdf#nameddest=unique_8.
• Read the safety and ESD-prevention guidelines described in b-asr9k-hardware-installation-guide_
chapter1.pdf#nameddest=unique_10.
• Ensure that you have all the necessary tools and equipment before beginning the procedure.
Have access to the safety and compliance document during the installation, see:
http://www.cisco.com/en/US/docs/routers/asr9000/hardware/rcsi/regulatory/compliance/asr9krcsi.html
Replacing Cisco ASR 9000 Series Router Components
1

Cisco ASR 9904 Specifications

General

Rack-mountable	Yes
Slots	4
Number of Full-Slot Line Cards	4
Power Supply	AC or DC
Redundancy	1+1
Cooling	Front-to-back or back-to-front
Operating Temperature	0 to 40 °C
Operating Relative Humidity	5% to 85% (non-condensing)
Storage Temperature	-40 to 70 °C
Relative Humidity	5 to 95% noncondensing

Summary

Prerequisites and Preparation

Replacing the Chassis Air Filter

Removing and Replacing the Fan Trays

Prerequisites

Steps and conditions required before removing fan trays.

Required Tools and Equipment

Lists necessary tools and equipment for fan tray replacement.

Removing and Replacing Power System Components

Changing Between Version 1, Version 2, Version 3, AC, and DC Power Modules

Details on changing between different versions and types of power modules.

Removing a Version 1 AC or DC Power Module

Removing a Version 2 or Version 3 AC or DC Power Module

Installing a Version 1 AC or DC Power Module

Installing a Version 2 or Version 3 AC or DC Power Module

Disconnecting AC Power

Reconnecting AC Power

Disconnecting DC Power

Reconnecting DC Power

Removing an AC or DC Power Tray from a Cisco ASR 9000 Series Router

Installing an AC or DC Power Tray into a Cisco ASR 9000 Series Router

Removing and Replacing Cards from the Chassis

Removing Cards from the Chassis

Replacing Cards in the Chassis

Migrating from RP1 to RP2 Card

Before you begin:

Prerequisites and conditions before migrating from RP1 to RP2.

Migrating from RP2 to RP3 Card

Before you begin:

Prerequisites and conditions before migrating from RP2 to RP3.

Migrating from RSP440 to RSP880 or RSP880-LT Card

Before you begin:

Prerequisites and conditions before migrating RSP440 to RSP880.

Migrating from RSP4-S to RSP880-LT Card (ASR 9906 Router)

Before you begin:

Prerequisites and conditions before migrating RSP4-S to RSP880-LT.

Migrating from RSP4/RSP4-S/RSP-L to RSP5 Card

Before you begin:

Prerequisites and conditions before migrating RSP4/S/L to RSP5.

Migrating from FC1 to FC2 Card

Migrating from A99-SFC2 to A99-SFC3 Card

Migrating from A99-SFC-S/A99-SFC-T to A99-SFC3-S/A99-SFC3-T Card

Removing a Chassis from the Equipment Rack

Installing a Replacement Chassis in the Equipment Rack

Packing a Chassis for Shipment