Need help?Do you have a question about the Cisco ASR 903 and is the answer not in the manual?
General| Form Factor | Modular |
|---|---|
| Storage Temperature | -40°C to 70°C (-40°F to 158°F) |
| Humidity | 5% to 95% non-condensing |
| Redundancy | Yes, redundant power supplies and route processors |
| Operating System | Cisco IOS XE |
| Power Supply | AC or DC |
| Switching Capacity | 240 Gbps |
| Operating Temperature | -40°C to 65°C (-40°F to 149°F) |
| MTBF | 200, 000 hours |
| Supported Protocols | IPv4, IPv6, MPLS, L2VPN, L3VPN |
| Interfaces | Gigabit Ethernet, 10 Gigabit Ethernet, T1/E1 |
Explains how redundant power supplies ensure uninterrupted power to the chassis.
Details installing the chassis mounting brackets on the front or rear of the router.
Steps to access the command line interface using the console port.
To Next Page
