Cisco ASR 903 Installing Guide

Installing the Cisco ASR 903 Router
This chapter describes how to install the Cisco ASR 903 Router.
•
Prerequisites, page 1
•
Installing the Router in a Rack, page 1
•
Installing the Chassis Ground Connection, page 17
•
Installing the Fan Tray, page 20
•
RSP Installation, page 23
•
Interface Module Installation, page 26
•
Installing the Power Supply, page 31
•
Connecting the Cisco ASR 903 Router to the Network, page 44
Prerequisites
Before installing the Cisco ASR 903 Router, it is important to prepare for the installation by:
•
Preparing the site (site planning) and reviewing the installation plans or method of procedures (MOP)
•
Unpacking and inspecting the Cisco ASR 903 Router
•
Gathering the tools and test equipment required to properly install the Cisco ASR 903 Router
For more instructions on how to prepare for the installation of the Cisco ASR 903 Router, see Preparing for
Installation.
Installing the Router in a Rack
The following sections describe how to install the Cisco ASR 903 Router in a rack:
Cisco ASR 903 and ASR 903U Aggregation Services Router Hardware Installation Guide
1

Cisco ASR 903 Specifications

General

Brand	Cisco
Model	ASR 903
Category	Network Router
Language	English