Need help?Do you have a question about the Cisco ASR 907 and is the answer not in the manual?
General| Model | ASR 907 |
|---|---|
| Product Series | ASR 900 |
| Product Type | Router |
| Rack-mountable | Yes |
| Rack Height | 1RU |
| Port Density | Varies by configuration |
| Interfaces/Ports | Gigabit Ethernet, 10 Gigabit Ethernet |
| Power Supply | Dual AC or DC |
| Operating System | Cisco IOS XE |
| Redundancy | Power supply redundancy, Fan redundancy |
| Management Interfaces | Console |
| Supported Protocols | BGP, OSPF, EIGRP, IS-IS, MPLS |
| Operating Temperature | 0 to 40 °C |
| Storage Temperature | -40 to 70°C (-40 to 158°F) |
| Environmental Conditions | Humidity: 5 to 95% relative humidity, noncondensing |
| Ports | Varies by configuration |
List and details of various interface modules supported by the Cisco ASR 907 Router.
Essential safety precautions to prevent injury and equipment damage during installation.
Crucial safety procedures and warnings related to electrical hazards during installation.
Procedures and precautions to prevent Electrostatic Discharge (ESD) damage to components.
Procedures for mounting the Cisco ASR 907 Router chassis into an equipment rack.
Instructions for establishing a proper chassis ground connection to ensure safety.
Procedures for installing DC and AC power supply modules into the router.
Steps for powering on the router and observing the initialization and boot process.
To Next Page
