EasyManua.ls Logo

Cisco ASR 907 - 1-Port OC-48;STM-16 or 4-Port OC-12;OC-3; STM-1;STM-4 + 12-Port T1;E1 + 4-Port; CEM Interface Module (A900-IMA3 G-IMSG); (A900-Ima8 S1 Z-CX)

Cisco ASR 907
204 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1-port OC-48/STM-16 or 4-port OC-12/OC-3 / STM-1/STM-4 + 12-Port T1/E1 + 4-Port T3/E3 CEM
Interface Module (A900-IMA3G-IMSG)
The A900-IMA3G-IMSG interface module supports:
12xDS1/E1 + 4xDS3/E3 interface over the high-density port.
1xOC48/12/3 Gigabit interface and 3xOC12/3 Gigabit interface.
If OC48 is enabled, then the remaining 3 ports are disabled.
Note
Figure 21: A900-IMA3G-IMSG Gigabit Ethernet Interface Module
For information on supported SFP modules, see Cisco ASR 900 Series Aggregation Services Routers Data
Sheet.
1-Port OC-192 or 8-Port Low Rate CEM Interface Module (10G HO / 10G LO) (A900-IMA8S1Z-CX)
The 1-port OC-192 interface module with 8-port low rate CEM interface module is a high density combination
interface module. This module supports 1 OC-192 port or 8 low rate CEM or 1 Gigabit Ethernet port.
Cisco ASR 907 Router Hardware Installation Guide
25
Cisco ASR 907 Router Overview
1-port OC-48/STM-16 or 4-port OC-12/OC-3 / STM-1/STM-4 + 12-Port T1/E1 + 4-Port T3/E3 CEM Interface Module (A900-IMA3G-IMSG)

Table of Contents

Other manuals for Cisco ASR 907

Related product manuals