Cisco ASR 907 - 32-Port T1;E1 Interface Module (A900-IMA32 D)

Figure 14: 16-port T1/E1 Interface Module
32-Port T1/E1 Interface Module (A900-IMA32D)
The 32-port T1/E1 interface module provides connectivity for up to 32 T1/E1 ports through two 68-pin Tyco
connectors. It is supported on the A900-RSP2A-64 module in slots 3, 4 and 5, and on the A900-RSP2A-128
on all slots.
The 32-port T1/E1 interface module requires the use of a patch panel to provide RJ48 or BNC connectors.
Figure 15: 32-portT1/E1 Interface Module
Cisco ASR 907 Router Hardware Installation Guide
22
Cisco ASR 907 Router Overview
32-Port T1/E1 Interface Module (A900-IMA32D)