Cisco ASR 907 User Manual

Figure 39: Cisco ASR 907 Chassis with Air Plenum
Air plenum2Cisco ASR 907 router1
Attaching the Cable Management Brackets
The router supports the following brackets:
• A907-CABLE-GUIDE—This guide helps in routing the cables from the interface modules; therefore
enabling a proper cable bending radius. See the figure below.
The mounting brackets and cable mounting brackets are assembled together. We recommend that the brackets
are installed before the chassis is installed in the Air Plenum.
Note
To install the optional cable management brackets, perform these steps:
Procedure
Step 1 Position the cable management brackets against the front of the chassis and align the four screw holes, as
shown in the figure below.
Cisco ASR 907 Router Hardware Installation Guide
65
Installing the Cisco ASR 907 Router
Attaching the Cable Management Brackets

Cisco ASR 907 Specifications

General

Brand	Cisco
Model	ASR 907
Category	Network Router
Language	English