Cisco ATA 186 User Manual

1-10
Cisco ATA 186 Installation and Configuration Guide
OL-1267-01
Chapter 1 Cisco ATA 186 Overview
About Supported Standards and Protocols
Dimensions
Emissions CFR 47 Part 15 Class B 2000
EN55024, EN50082-1
EN55022/CISPR22 Class B
VCCI Class B
AS/NZS 3548:1995 Class B
ICES-003 (Issue 2, Class B, April 1997)
Immunity EN50082-1 including the following
EN61000-3-2, Electromagnetic Compatibility
EN61000-3-3, Electromagnetic Compatibility
EN61000-4-2, ESD
EN61000-4-3, Radiated Immunity
EN61000-4-4, Burst Transients
EN61000-4-5, Surge
EN61000-4-6, Injected RF
EN61000-4-11, Dips and Sags
Table 1-7 Dimensions
Category Specification
Length 6.5 in (16.5 cm)
Width 6 in (15.25 cm)
Height 1.5 in (3.8 cm)
Weight 15 oz (425 gm)
Table 1-6 Standards Compliance
Category Specification

Cisco ATA 186 Specifications

General

Operating Temperature	32°F to 104°F (0°C to 40°C)
Protocol	SIP, H.323
Network Interface	10/100BASE-T Ethernet
Audio Codec Support	G.729a, G.723.1
Power Supply	5V DC
Weight	0.23 kg (0.5 lb)
Relative Humidity	10 to 90% noncondensing
Ports	2 RJ-11 FXS ports