Cisco ATA 192 User Manual

Table 15: CSS Dump Settings
DescriptionField
Set whether the ATA creates a crash dump file
automatically when it occurs an error.
Click Enabled to enable the feature, click Disabled
to disable it.
Default setting: Disabled
Auto Crash Dump
Set whether the user can manually trigger the creation
of the CSS dump by pressing **## on the phone
keypad.
Click Enabled to enable the feature, click Disabled
to disable it.
Default setting: Disabled
Manual Trigger Key(**##)
List the CSS file which is captured by user.
Click Refresh to refresh the CSS Memory Dump File.
Click Download to download the dump file on your
computer.
CSS Dump List
Crash Dump
Use the Administration > Log > Crash Dump page to set and download crash dump file.
Table 16: CSS Dump Settings
DescriptionField
Set whether the runtime log can be stored in the flash
memory.
Click Enabled to enable the feature, click Disabled
to disable it.
Default setting: Disabled
Runtime log to flash
Display the captured crash dump file.
Click the file name to download it on your computer.
Click Refresh to refresh the crash dump file.
Crash Dump File
Cisco ATA 191 and ATA 192 Analog Telephone Adapter User Guide for Multiplatform Firmware
23
Configure Features
Crash Dump

Cisco ATA 192 Specifications

General

Ports	2 FXS ports
Network Interface	10/100 Ethernet
Voice Protocol	SIP
Audio Codecs	G.711, G.726, G.729
Operating Temperature	0 to 40°C (32 to 104°F)
Storage Temperature	-20 to 60°C (-4 to 140°F)
Humidity	10 to 90% non-condensing
Compliance	FCC, CE, UL
Fax Support	T.38, G.711 pass-through