Cisco BEKEM - Allocate a Key Expansion Module Type; Allocate Key Expansion Module Type via Phone Menu; Reset the Single LCD Screen Key Expansion Module

Allocate a Key Expansion Module Type
You can assign the type of key expansion module that the phone supports:
• BEKEM
• CP-8800-Audio
• CP-8800-Video
Before you begin
• Access the phone administration web page. See Access the Phone Web Page.
Procedure
Step 1 Select Voice > Att Console.
Step 2 Set the KEM Type field as described in the General table.
Step 3 Press Submit All Changes.
Allocate a Key Expansion Module Type with the Phone Menu
You can assign the type of key expansion module that the phone supports.
Procedure
Step 1 Press Applications .
Step 2 Select User preferences > Attendant console preferences > KEM type.
Step 3 Select the key expansion module type.
Step 4 Press Save.
Reset the Single LCD Screen Key Expansion Module
If you are having technical difficulties with your Cisco IP Phone 8800 Key Expansion Module, you can reset
the module to the factory default settings.
Cisco IP Phone Key Expansion Module
13
Cisco IP Phone Key Expansion Module
Allocate a Key Expansion Module Type