Cisco C891F User Manual

1-113
Cisco Integrated Services Router Hardware Installation Guide
Chapter 1 Product Overview
Cisco 860, 880, 890 Series
Cisco C891 Series ISRs
Cisco C891 Series ISRs are designed to deliver secure broadband, metro Ethernet, wireless LAN
(WLAN) connectivity, and business continuity. Cisco C891 Series ISRs also provide a 1-port Gigabit
Ethernet SFP socket for WAN connectivity.
This section includes the hardware information for the following models:
• Cisco C891F
• Cisco C891FW
Table 1-40 provides information about the hardware specifications of the Cisco C891 Series Routers.
For detailed hardware specifications, see the Cisco C890 Series hardware data sheet at:
http://www.cisco.com/en/US/prod/collateral/routers/ps380/data_sheet_c78-519930.html
Cisco C891F Router
Figure 1-73 shows the front panel of the Cisco C891F Router.
Table 1-40 Hardware Specifications of Cisco C891 Series ISR
Hardware Description
Flash Memory 256 MB
Main Memory 1-GB DDR RAM; fixed and not extendable
USB port A USB 2.0-compliant port located on the back
panel
FAN Fanless chassis
PoE 4 PoE ports
WAN 1-port GE or 1-port SFP
Data Backup
• 1-port FE
• 1-port ISDN
• 1-port V.92
Console or auxiliary port RJ-45
LAN switch 8-port Gigabit Ethernet
Embedded Wireless AP Dual 802.11b/g/n and 802.11a/n radios for
C891FW

Cisco C891F Specifications

General

Category	Network Router
USB Ports	1 x USB 2.0
Form Factor	Desktop
RAM	512 MB
Flash Memory	256 MB
Device Type	Router
Connectivity Technology	Wired
Data Link Protocol	Ethernet, Fast Ethernet, Gigabit Ethernet
Product Name	Cisco C891F
LAN Ports	8
Console Ports	1
Network / Transport Protocol	IPSec, L2TP, PPPoE
Remote Management Protocol	SNMP, Telnet
Features	Firewall protection, VLAN support, VPN support, IPv6 support, QoS
Compliant Standards	IEEE 802.1Q, IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
Operating Temperature	32 °F to 104 °F (0 °C to 40 °C)
Operating Humidity	10% to 85% non-condensing
Interfaces	1 x USB 2.0, 1 x RJ-45 console
Ports	1 x USB 2.0, 1 x console