Name: Cisco C9130AXI Series
Brand: Cisco
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Cisco Catalyst 9130AX Series Access Points

Figure 16 Locking the AP to the Bracket

10 Grounding the Access Point

Warning

Only trained and qualified personnel should be allow ed to install, replace, or service this equipment.

Statement 1030

Grounding is not required for indoor installations. However, while using the C9130AXE AP model, if the external antenna

is placed outdoors, you must connect the outdoor antenna cable to a lightning arrestor and connect the lightning arrestor

to ground.

For supported external antennas, see

“List of External Antennas Supported on C9130AXE”.

The outdoor antenna connection must be grounded in accordance with the ANSI/NFPA 70, the National Electrical code

(NEC), Article 800, Grounding of Outer Conductive Shield of a Coaxial Cable.

Warning

To reduce the risk of electric shock, the shield of the coaxial cable must be connected to the building

earth.

Statement 1253

Position of the hasps for the locks on the back of the AP

Questions and Answers:

Need help?

Do you have a question about the Cisco C9130AXI Series and is the answer not in the manual?

Cisco C9130AXI Series Specifications

General