CHAPTER 2
Prepare for Router Installation
Before you install the Cisco 900 Series Integrated Services Routers, you must prepare your site for the
installation. This chapter provides pre-installation information, such as recommendations and requirements
that should be considered before installing your router.
See the following sections to prepare for installation:
• Safety Recommendations, on page 9
• General Site Requirements, on page 10
• Rack Requirements, on page 11
• Router Environmental Requirements, on page 12
• Power Guidelines and Requirements, on page 12
• Network Cabling Specifications, on page 13
• Required Tools and Equipment for Installation , on page 14
Safety Recommendations
IMPORTANT SAFETY INSTRUCTIONS
This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work
on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard
practices for preventing accidents. Use the statement number provided at the end of each warning to locate
its translation in the translated safety warnings that accompanied this device. Statement 1071
SAVE THESE INSTRUCTIONS
Warning
Safety With Electricity
No user-serviceable parts inside. Do not open. Statement 1073
Warning
Hardware Installation Guide for the Cisco 900 Series Integrated Services Router
9
To Next Page
Loading...
Need help?
General
