Cisco Catalyst 2810 Series Hardware Installation Guide

CHAPTER 3
Installing the Router
This chapter provides procedures for installing the Cisco Catalyst 8500 Series Edge Platform on an equipment
shelf, tabletop, or in an equipment rack.
• Installation Instructions, on page 25
• Guidelines for Installation, on page 26
• Installing the Router on a Standalone Equipment Shelf or Tabletop, on page 27
• Guidelines for Rack Installation, on page 27
• Attaching the Front Rack-Mount Brackets, on page 29
• Attaching the Rear Rack-Mount Brackets, on page 30
• Mounting the Router in the Rack, on page 30
• Attaching the Cable Management Bracket, on page 32
• Chassis Ground Connection, on page 33
• Connecting Cables, on page 34
Installation Instructions
IMPORTANT SAFETY INSTRUCTIONS
This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work
on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard
practices for preventing accidents. Use the statement number provided at the end of each warning to locate
its translation in the translated safety warnings that accompanied this device.
SAVE THESE INSTRUCTIONS
Warning
IMPORTANT SAFETY INSTRUCTIONS
Invisible laser radiation may be emitted from the fiber cable or connector. Do not view with optical instruments.
Viewing the laser output with certain optical instruments (for example, eye loupes, magnifiers, and microscopes)
within a distance of 100 mm may pose an eye hazard.
Note
Cisco Catalyst 8500 Series Edge Platforms Hardware Installation Guide
25

Cisco Catalyst 2810 Series Specifications

General

Brand	Cisco
Model	Catalyst 2810 Series
Category	Network Router
Language	English