19
Regulatory Compliance and Safety Information for the Catalyst 2940 Switch
78-16656-01
Regulatory Standards Compliance
Regulatory Standards Compliance
This section includes all regulatory, safety, and EMC standards. The Catalyst 2940 switch is in
compliance with national and international standards as described in Table 1.
For specific details about the years, revisions and relevant amendments please refer to the applicable
declaration of conformity available at http://www.cisco.com.
Suomalainen:
Tämä laite on direktiivien 73/23/ETY ja 89/336/ETY (kuten muutettu direktiivissä 93/68/ETY)
keskeisten vaatimusten ja määräysten mukainen.
Svenska:
Denna utrustning uppfyller de väsentliga kraven och andra villkor i direktiven 73/23/EEC och
89/336/EEC enligt ändringarna i direktiv 93/68/EEC.
Table 1 Regulatory Standards Compliance for the Catalyst 2940 Switch
Specification Description
Regulatory Compliance Products with the CE Marking are compliant with the 89/336/EEC and
73/23/EEC directives, which include the safety and EMC standards listed.
Safety UL/CSA 60950
IEC 60950 with all country deviations
EN60950
AS/NZS 60950
EMC USA CFR47, FCC, Part 15 Class A
EN55022: 1998 (CISPR22) Class A
EN55024: 1998 (CISPR24)
EN55024: ITE Immunity Standard (CE Mark), 1998
EN61000-4-2/IEC1000-4-2
EN61000-4-3/IEC1000-4-3
EN61000-4-4/IEC1000-4-4
EN61000-4-5/IEC1000-4-5
EN61000-4-6/IEC1000-4-6
EN61000-4-11/IEC1000-4-11
VCCI Class A
AS/NZS 3548 Class A
CE
CNS 13438 Class A
CLEI code
ICES-003, Class A
BSMI, Class A
MIC Mark
To Next Page
Loading...
Need help?
General