Cisco Catalyst 2960 Series Datasheet

Data Sheet
© 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 19 of 21
Table 9. Ordering Information for Cisco Catalyst 2960 LAN Base Switches
Part Numbers Description
WS-C2960PD-8TT-L
●
8 Ethernet 10/100 ports and 1 10/100/1000 PoE input port
●
Power adaptor (PWR-A=) and power cord sold separately
●
Compact size with no fan; magnet included
●
LAN Base Image installed
WS-C2960-8TC-L
●
8 Ethernet 10/100 ports and 1 dual-purpose uplink (dual-purpose uplink port has one
10/100/1000 Ethernet port and 1 SFP-based Gigabit Ethernet port, 1 port active)
●
Compact size with no fan; magnet included
●
LAN Base Image installed
WS-C2960-24TT-L
●
24 Ethernet 10/100 ports and two 10/100/1000TX uplinks
●
1 RU fixed-configuration
●
LAN Base Image installed
WS-C2960-48TT-L
●
48 Ethernet 10/100 ports and two 10/100/1000TX uplinks
●
1 RU fixed-configuration
●
LAN Base Image installed
WS-C2960-24LT-L
●
24 Ethernet 10/100 ports with 8 PoE ports and two 10/100/1000TX uplinks
●
1 RU fixed-configuration
●
LAN Base Image installed
WS-C2960-24PC-L
●
24 Ethernet 10/100 PoE ports and 2 dual-purpose uplinks
●
1 RU fixed-configuration
●
LAN Base Image installed
WS-C2960-48PST-L
●
48 Ethernet 10/100 PoE ports and 2 10/100/1000 uplinks and 2 SFP uplinks
●
1 RU fixed-configuration
●
LAN Base Image installed
WS-C2960-48TC-L
●
48 Ethernet 10/100 ports and 2 dual-purpose uplinks (each dual-purpose uplink port has
one 10/100/1000 Ethernet port and 1 SFP-based Gigabit Ethernet port, 1 port active)
●
1 RU fixed-configuration
●
LAN Base Image installed
WS-C2960G-8TC-L
●
7 Ethernet 10/100/1000 ports and 1 dual-purpose uplink (dual-purpose uplink port has
one 10/100/1000 Ethernet port and 1 SFP-based Gigabit Ethernet port, 1 port active)
●
Compact size with no fan; magnet included
●
LAN Base Image installed
WS-C2960G-24TC-L
●
20 Ethernet 10/100/1000 ports and 4 dual-purpose uplinks (each dual-purpose uplink port
has one 10/100/1000 Ethernet port and 1 SFP-based Gigabit Ethernet port, 1 port active)
●
1 RU fixed-configuration
●
LAN Base Image installed
WS-C2960G-48TC-L
●
44 Ethernet 10/100/1000 ports and 4 dual-purpose uplinks (each dual-purpose uplink port
has one 10/100/1000 Ethernet port and 1 SFP-based Gigabit Ethernet port, 1 port active)
●
1 RU fixed-configuration
●
LAN Base Image installed
PWR-RPS2300 Cisco Redundant Power System 2300 and Blower,No Power Supply
BLNK-RPS2300= Spare Bay Insert for Cisco Redundant Power System 2300
CAB-RPS2300-E= Spare RPS2300 Cable for Cisco Catalyst 2960-24PC-L and 2960-24LT-L switches
CAB-RPS2300= Spare RPS2300 Cable for Cisco Catalyst 2960 switches except Catalyst 2960-24PC-L and
2960-24LT-L switches
BLWR-RPS2300= Spare 45CFM Blower for Cisco Redundant Power System 2300
C3K-PWR-750WAC= Catalyst 3750-E/3560-E/RPS 2300 750WAC power supply spare
PWR-A= Power adaptor for Cisco Catalyst 2960PD-8TT-L compact switch
CBLGRD-C2960-8TC= Cable guard for the Cisco Catalyst 2960-8TC compact switch
CBLGRD-C2960G-8TC= Cable guard for the Cisco Catalyst 2960G-8TC compact switch
RCKMNT-19-CMPCT= Rack-mount for the Cisco Catalyst 2960-8TC and Catalyst 2960G-8TC compact switches
RCKMNT-1RU= Spare rack-mount kit for the Cisco Catalyst 2960 Series
RCKMNT-REC-1RU= 1 RU recessed rack-mount kit for the Cisco Catalyst 2960 Series

Cisco Catalyst 2960 Series Specifications

General

Layer	Layer 2
Power over Ethernet (PoE)	Available on some models
RAM	128 MB
Flash Memory	32 MB
MAC Address Table Size	8000
Operating Temperature	0°C to 45°C (32 to 113°F)
Ports	24 or 48 x 10/100/1000