Do you have a question about the Cisco Catalyst 2960-SF Series and is the answer not in the manual?
Device Type | Switch |
---|---|
Enclosure Type | Rack-mountable |
Layer | Layer 2 |
Power Device | Internal power supply |
Voltage Required | 100-240V AC |
Operating Temperature | 32 to 113°F (0 to 45°C) |
Power over Ethernet (PoE) | Optional |
Stacking | Not supported |
MAC Address Table Size | 8192 entries |
Routing Protocol | Static IP routing |
Remote Management Protocol | SNMP 1, Telnet, HTTP, HTTPS |
Features | VLAN support, QoS, IGMP snooping |
Compliant Standards | IEEE 802.1Q, IEEE 802.1D |
Operating Humidity | 10% to 90% non-condensing |
Model | Catalyst 2960-SF Series |
Lists features for Cisco Catalyst 2960-SF LAN Base models, including uplinks, PoE, and troubleshooting.
Lists features for Cisco Catalyst 2960-SF LAN Lite models, including uplinks, troubleshooting, and warranty.
Details configurations for Cisco Catalyst 2960-SF Series Switches with LAN Base and LAN Lite Software.
Explains Cisco FlexStack for true stacking, unified management, and high availability.
Details PoE+ capabilities, including power per port and total budget for switch models.
Describes Cisco EnergyWise architecture for energy reduction and management.
Introduces Smart Install, Auto Smartports, and Smart Troubleshooting for simplified operations.
Lists features like AutoQoS, Auto-negotiation, and PAgP for simplified switch operation.
Covers Cisco Network Assistant and Cisco Prime for network management capabilities.
Details Cisco Integrated Security Features like Port Security, DHCP Snooping, and Dynamic ARP Inspection.
Explains TrustSec capabilities for authentication, access control, and policy management.
Lists features like Private VLAN Edge, Multidomain Authentication, and BPDU Guard.
Discusses FlexStack stacking and Cross-Stack EtherChannel for resiliency.
Details QoS mechanisms like Cross-stack QoS, CoS/DSCP classification, and rate limiting.
Lists performance and scalability numbers including bandwidth, memory, and MAC addresses.
Provides physical dimensions, weight, and acoustic noise levels for switch models.
Details operating and storage temperature, altitude, and humidity specifications.
Lists MTBF values for various Cisco Catalyst 2960-SF models.
Describes network interfaces, stacking/console cables, power, and status LEDs.
Lists supported MIBs, standards, and RFC compliance for the switches.
Details AC/DC input voltage, current, and power rating for the switch models.
Shows power consumption figures based on traffic load for different switch models.
Lists safety certifications and electromagnetic emissions compliance for the switches.
Details the terms of the enhanced limited lifetime hardware warranty, including TAC support.
Outlines the policy for maintenance updates and bug fixes for Cisco Catalyst LAN Base software.
Describes available technical services like SMARTnet, Smart Foundation, Smart Care, and SP Base.
Provides part numbers and descriptions for ordering Cisco Catalyst 2960-SF Series Switches.
Lists part numbers and descriptions for ordering Cisco Catalyst 2960-SF accessories.