Cisco Catalyst 3560-C Getting Started Guide

Catalyst 3560-C and 2960-C Switch Getting Started Guide
18
Catalyst 3560-C and 2960-C Switch Getting Started Guide
OL-23802-02
Install the SFP Modules
Some Catalyst 3560-C and 2960-C models have SFP module slots.
For a list of supported modules, see the release notes on Cisco.com. For detailed
i
nstructions on installing, removing, and connecting to SFP modules, see the
documentation that came with the SFP module.
Caution Removing and installing an SFP module can shorten its useful life. Do not remove
and insert SFP modules more often than is absolutely necessary.
Step 1
Grasp the module on the sides, and insert it
into the switch slot until you feel the
connector snap into place.
Step 2
Connect an appropriate cable to the module
port. Connect the other cable end to the other
device.
9
Catalyst 3560-C G
Series
PoE
5678
10
208784
9
Catalyst 3560-C G
Series
PoE
5678
10
208785

Cisco Catalyst 3560-C Specifications

General

Brand	Cisco
Model	Catalyst 3560-C
Category	Switch
Language	English