Cisco Catalyst 3560 - Securing the AC Power Cord (Catalyst 3560 8- and 12-Port Switches)

14
Mounting the Switch with a Magnet (Catalyst 3560 8- and 12-Port Switches)
According to safety regulations, when you mount the switch with a magnet, make sure its front panel faces down to prevent
airflow restriction and to provide easier access to the cables. This requires that you mount the switch with a magnet only on a
vertical magnetic surface such as a metal filing cabinet.
1. Position the mounting magnet on the mounting surface.
2. Place the bottom of the switch on the magnet.
6 Securing the AC Power Cord (Catalyst 3560 8- and 12-Port Switches)
The AC power-cord retainer is an optional part (PWR-CLIP-CMP).
1
Metal mounting surface
3
Switch front panel
2
Mounting magnet
Step 1
Insert the power-cord retainer wire into the slot on the
plastic holder.
Step 2
Attach the plastic holder onto the switch rear panel with
the supplied screw.
250605
2
1
3
250519