13
Side-By-Side Stacking
In this example, eight switches are stacked side-by-side with redundant connections by using 0.5- and
3-meter StackWise cables.
In this example, nine switches are stacked side-by-side with redundant connections by using 0.5- and
3-meter StackWise cables.
Power On Sequence for Switch Stacks
Consider these guidelines before you power on the switches in a stack:
• The sequence in which the switches are first powered on might affect the switch that becomes the
stack master.
• If you want a particular switch to become the stack master, power on that switch first. This switch
becomes the stack master and remains the stack master until a master re-election is required. After
20 seconds, power on the remaining switches in the stack.
158113
86825
90532
To Next Page
Loading...
