Cisco Catalyst C9300-24U User Manual

C9300-NM-4M Module 73
C9300-NM-2Y Module 74
C9300-NM-8X Module 74
C9300X-NM-2C Module 74
C9300X-NM-4C Module 74
C9300X-NM-8M Module 75
C9300X-NM-8Y Module 75
Removing a Network Module 76
Installing and Removing Cisco Transceiver Modules 77
Installing a Cisco Pluggable Transceiver Module 77
Removing Cisco Pluggable Transceiver Modules 78
Finding the Network Module Serial Number 79
Installing a Power Supply 81
CHAPTER 5
Power Supply Modules Overview 81
Installation Guidelines 86
Installing or Replacing an AC Power Supply 87
Installing a DC Power Supply 89
Equipment That You Need 89
Grounding the Switch 90
Installing the DC Power Supply in the Switch 92
Wiring the DC Input Power Source 93
Finding the Power Supply Module Serial Number 94
Installing a Fan Module 97
CHAPTER 6
Fan Modules Overview 97
Installation Guidelines 98
Installing a Fan Module 98
Finding the Fan Module Serial Number 99
Installing a USB 3.0 SSD 101
CHAPTER 7
USB 3.0 SSD Overview 101
Installing an SSD Module on C9300, C9300X and C9300L Switches 102
Installing an SSD Module on C9300LM Switches 104
Cisco Catalyst 9300 Series Switches Hardware Installation Guide
v
Contents

Cisco Catalyst C9300-24U Specifications

General

Model	C9300-24U
Device Type	Switch
Enclosure Type	Rack-mountable
DRAM	8 GB
Flash	16 GB
Stacking Bandwidth	480 Gbps
Max Stacking Number	8
PoE Budget	1440W
MAC Address Table Size	32, 000 entries
Power Redundancy	Yes
Uplink Interfaces	4 x 10G SFP+
Routing Protocol	OSPF, EIGRP, BGP, IS-IS, RIP
Remote Management Protocol	SNMP, CLI, HTTP, HTTPS, SSH, Telnet
Features	Quality of Service (QoS), Access Control List (ACL), VLAN
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.3ad, IEEE 802.1x
Dimensions	17.5 in x 17.5 in x 1.7 in
Operating Temperature	0 to 45°C
Ports	24 x 10/100/1000 (UPOE)
Weight	14.99 lbs