Deployment
Cisco 1000 Series Lightweight Access Point Placement Guidelines
17
Deployment Guide: Cisco Aironet 1000 Series Lightweight Access Points
78-17279-01
• If any power is being applied to the Cisco 1000 series lightweight access point, remove the power
now.
Verifying RF Coverage Using the Site Survey Tool
• Follow the manufacturer’s instructions supplied with the Site Survey Tool to collect signal strength
information from the coverage area being tested.
• If necessary, reposition the Cisco 1000 series lightweight access point(s) in the coverage area and
repeat the previous steps until you have verified coverage, and then continue.
Cisco 1000 Series Lightweight Access Point Placement
Guidelines
This step describes where and how Cisco 1000 series lightweight access points should be placed. You
must know certain information to select Cisco 1000 series lightweight access point locations:
• Collecting Maps or Building Floor Plans
• Noting Deployment Constraints
• Access Point Placement Guidelines
• Cisco 1000 Series Lightweight Access Point Placement
To Next Page
Loading...
Need help?
General
