Cisco DPC3939

2
About the Wireless Gateway 2 (Model Numbers: DPC3939, TC8706C)
The Wireless Gateway 2 is an all-in-one product that connects XFINITY Internet,
XFINITY Voice, and home networking. It provides wired and Wi-Fi connectivity, so
there’s no need for a separate router.
•
Dual-Band Wi-Fi 2.4 & 5 GHz
•
Parental Controls
•
Firewall
•
Port Forwarding & Blocking
•
Wi-Fi Protected Setup (WPS)
Learn how Wi‑Fi and
5 GHz
works in your home.
Check out p. 6.
This Quick Start Guide will help you:
Step Find Your Default Wireless Network Info
Step Connect Your Wi-Fi Devices
Step Log In and Secure the Admin Tool
Step . Find Your Default Wireless Network Info
A LifttheWirelessGateway
toviewthebottompanel
On the bottom panel label, find
the two Network Names (SSIDs)
and the one Network Key
(Password). The case-sensitive
password is the same for both
Network Names (SSIDs).
B Writedownyour
information
In the lines below, write
down your wireless network
information for future reference.
Wireless “Network Name (SSID 1)” for 2.4 GHz Wi-Fi Band (Example: HOME-XXXX-2.4)
Wireless “Network Name (SSID 2)” for 5 GHz Wi-Fi Band (Example: HOME-XXXX-5)
Wireless “Network Key (Password)” Same for both bands (case-sensitive)
Wireless
Network Names
(SSIDs)
Wireless
Network Key
(Password)
Gateway’s
Bottom Panel
Note: The default Network Names (SSIDs) and Network Key (Password) are unique to your Wireless Gateway. If
you’d like to change them, see p. 5. We recommend changing the Network Key (Password).