EasyManua.ls Logo

Cisco DPC3939

Cisco DPC3939
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
• 5 GHz Wi-Fi signals may not travel as far as 2.4 GHz. In areas of your home that
are furthest away from the Wireless Gateway 2, only the 2.4 GHz network may
be available. We recommend connecting to both 2.4 and 5 GHz networks during
initial set-up of all your Wi-Fi devices .
If you’re connected to the Wireless Gateway 2s 5 GHz network and move out
of the 5 GHz range (move to a different room), your Wi-Fi device may
disconnect and automatically reconnect to your 2.4 GHz (if you’ve connected to it
previously).
Note: When you’re back in the 5 GHz range, go to Wi-Fi settings (p. 3-4) to reconnect to the Wireless
Gateway 2’s 5 GHz network in order to experience its benefits.
• The Wi-Fi bars on your Wi-Fi device indicate signal strength.
• Some Wi-Fi devices support Wi-Fi Protected Setup (WPS).
WPS lets you set up secure Wi-Fi networks without manually
entering your Wi-Fi network information. Pressing the WPS button
on the Wireless Gateway 2 initiates WPS for both 2.4 and 5 GHz Wi-Fi bands. You
can then connect to either band using WPS.
Learn about the Wireless Gateway 2 at http://customer.comcast.com/userguides.
For questions about your XFINITY services, call 1-800-XFINITY.
Windows is a registered trademark of Microsoft Corporation in the United States and other countries. Mac OS
®
and
OS X
®
are registered trademarks of Apple Inc. IOS is a trademark or registered trademark of Cisco in the U.S. and
other countries and is used under license. Android is a trademark of Google Inc. All trademarks are the property of
their respective owners. © 2013 Comcast. All rights reserved.

Other manuals for Cisco DPC3939

Related product manuals