Use the descriptions and instructions in the following table to configure MAC
address filtering for your wireless network. After you make your selections, click
Save Filter Settings to apply your changes.
Field Description
SSID
Click the SSID drop-down arrow to select the SSID to which
you would like to apply the filtered clients:
Allow All- allow access to all the clients included in WiFi
Control List
Allow- allow access to the selected clients in WiFi Control
List
Deny- deny access to the selected clients in WiFi Control
List
Manually-Added WiFi
Devices
Device Name
Enter the name of the device in the Device Name field.
Devices
MAC Address
Enter the MAC address of the device in the MAC Address
fields.
Click ADD. The WiFi client is added to the WiFi Control List.
Configure and Connect WiFi Protected Setup Clients
Use this page to manually set up and connect WPS clients, WPS PIN method and
Push Button.
To Next Page
Loading...
Need help?
General