Cisco EPC3925 Datasheet

Data Sheet
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 6 of 12
Specification
Value
Voice (continued)
Call Feature Support
●
Caller ID
●
Call Waiting with Caller ID
●
Cancel Call Waiting
●
Call Conferencing (3-way calls)
●
Configurable Hook-Flash Support
●
Distinctive Ringing (Configurable for up to 11 ring patterns per phone line)
●
Ring Splash
●
Stutter Dial Tone
●
Off hook Warning Tone
●
Open Switch Interval support to enhance answering machine compatibility
●
Configurable Star Codes
●
Euro/US Hook-Flash Type
●
Call Transfer
●
Message Waiting Indicator
●
Warm Line
●
Call Forwarding Unconditional
●
Call Forwarding on Busy
●
Call Forwarding No Answer
●
Call Return
●
Redial Call
●
Automatic Redial
●
Other call features available with compliant CMS or gateway
Networking (non-call)
Services
●
Known Good Proxy
●
Proxy Failover
●
Registration Control
●
UDP, TCP
●
TLS
●
DNS
●
DQoS-lite
●
STUN
●
Static NAT
●
NAT Keep Alive
SIP Header Control
●
User-Agent Header Control
●
Server Header Control
●
Accept Language Header Control
●
Proxy Require Header Control
●
FQDN in URI Control
●
To-tag Matching Control
●
Escape Star Character in URI Field
Administrative Features
●
Call Data Record
●
Call Statistics Agent
●
Debug Console Logging
●
Debug Logger
Telephone Ring Loading
Full 5 REN support on each phone line (10 REN total)
Ring Signal
Configurable balanced ring with configurable DC offset
Max Phone Line Distance
Supports up to 1000 ft of AWG26 wire (0.4mm) on each phone line. Supports operation with
typical in-home telephone wiring
Country-Specific
Telephone Parameters
Supported
Australia, United States, Japan, United Kingdom, Germany, France, Belgium, Netherlands,
Finland, Italy, Switzerland, Sweden, Denmark, Brazil, Poland, Czech, Hungary, Romania, ETSI
101 909-18
IPV6
dual IPV4/IPV6
CM and EMTA

Cisco EPC3925 Specifications

General

Security algorithms	WEP, WPA, WPA-PSK, WPA2, WPA2-PSK
Wi-Fi	Yes
Modulation	128-QAM, 16-QAM, 32-QAM, 64-QAM, 8-QAM, QPSK
Frequency band	2.4 GHz
Networking standards	IEEE 802.11n
USB 2.0 ports quantity	1
Ethernet LAN (RJ-45) ports	4
Input current	1.5 A
Input voltage	15 V
Input frequency	50/60 Hz
Power requirements	230 VAC
Power consumption (typical)	17 W
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	0 - 95 %
Voice codecs	G.711, G.723, G.726, G.728, G.729, G.729A

Weight and Dimensions

Weight	430 g
Dimensions (WxDxH)	176 x 145 x 45 mm