Cisco EPC3925 User Manual

4021192 Rev B 77
Configure Applications and Gaming
Applications and Gaming DMZ Page Description
Use the descriptions and instructions in the following table to configure the port
range triggering for the residential gateway. Select enable for each DMZ Host IP
address. After you make your selections, click Save Settings to apply your changes
or Cancel Changes to cancel.
Section
Field Description
DMZ
DMZ Hosting
Select the desired option:
 Enable
 Disable (factory default)
DMZ Host IP Address
DMZ allows one IP address to be unprotected while others remain
protected. Enter the IP address of the computer you want to
expose to the Internet in this field.

Cisco EPC3925 Specifications

General

Security algorithms	WEP, WPA, WPA-PSK, WPA2, WPA2-PSK
Wi-Fi	Yes
Modulation	128-QAM, 16-QAM, 32-QAM, 64-QAM, 8-QAM, QPSK
Frequency band	2.4 GHz
Networking standards	IEEE 802.11n
USB 2.0 ports quantity	1
Ethernet LAN (RJ-45) ports	4
Input current	1.5 A
Input voltage	15 V
Input frequency	50/60 Hz
Power requirements	230 VAC
Power consumption (typical)	17 W
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	0 - 95 %
Voice codecs	G.711, G.723, G.726, G.728, G.729, G.729A

Weight and Dimensions

Weight	430 g
Dimensions (WxDxH)	176 x 145 x 45 mm