Cisco EPC3925 User Manual

4021192 Rev B 85
Manage the Gateway
Administration > Backup & Restore
Administration Backup & Restore allows you to back up you configuration of the
Gateway and store it on your computer. You can use this file to restore a previously
saved configuration for your Gateway.
Select the Back Up & Restore tab to open the Administration Back Up & Restore
page.
CAUTION:
Restoring a configuration file will destroy (overwrite) all of the existing
settings.
Section
Field Description
Back Up Configuration
Use the Back Up Configuration feature to save a copy of the
current configuration and store the file on your computer. Click
Back Up to start the download.
Restore Configuration
Use the Restore Configuration feature to restore a previously
saved configuration file. Click Browse to select the configuration
file, and then click Restore to load the configuration file to the
device.

Cisco EPC3925 Specifications

General

Security algorithms	WEP, WPA, WPA-PSK, WPA2, WPA2-PSK
Wi-Fi	Yes
Modulation	128-QAM, 16-QAM, 32-QAM, 64-QAM, 8-QAM, QPSK
Frequency band	2.4 GHz
Networking standards	IEEE 802.11n
USB 2.0 ports quantity	1
Ethernet LAN (RJ-45) ports	4
Input current	1.5 A
Input voltage	15 V
Input frequency	50/60 Hz
Power requirements	230 VAC
Power consumption (typical)	17 W
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	0 - 95 %
Voice codecs	G.711, G.723, G.726, G.728, G.729, G.729A

Weight and Dimensions

Weight	430 g
Dimensions (WxDxH)	176 x 145 x 45 mm