Cisco Firepower 1000 - Page 5

ciscoasa(config)# boot system disk0:/cisco-ftd-fp2k.6.5.0.SPA
fxos_set_boot_system_image(filename: cisco-ftd-fp2k.6.5.0.SPA)
fxos_get_current_bundle_version(instance 41)
The system is currently installed with security software package 9.13.1, which has:
- The platform version: 2.7.1.45
- The CSP (asa) version: 9.13.1
Preparing new image for install...
!!!!!!!!!!!!!!!!!!!!
Image download complete (Successful unpack the image).
Attention:
If you proceed the system will be re-imaged and reboot automatically.
All existing configuration will be lost and the default configuration applied.
Do you want to proceed? [confirm]
Finalizing image install process...
Installation succeeded.
Step 5 Wait for the chassis to finish rebooting.
FXOS comes up first, but you still need to wait for the FTD to come up.
After the application comes up and you connect to the application, you are prompted to accept the EULA and
perform initial setup at the CLI. You can use either Firepower Device Manager or Firepower Management
Center to manage your device. See the Quick Start Guide for your model and your manager to continue setup:
http://www.cisco.com/go/ftd-asa-quick
Example:
[...]
************ Attention *********
Initializing the configuration database. Depending on available
system resources (CPU, memory, and disk), this may take 30 minutes
or more to complete.
************ Attention *********
Executing S09database-init [ OK ]
Executing S11database-populate
Cisco FPR Series Security Appliance
firepower login: admin
Password:
Successful login attempts for user 'admin' : 1
Copyright 2004-2019, Cisco and/or its affiliates. All rights reserved.
[...]
User enable_1 logged in to firepower
Logins over the last 1 days: 1.
Failed logins since the last login: 0.
Type help or '?' for a list of available commands.
firepower>
firepower# connect ftd
You must accept the EULA to continue.
Please enter 'YES' or press <ENTER> to AGREE to the EULA:
[...]
Cisco ASA and Firepower Threat Defense Reimage Guide
5
Cisco ASA and Firepower Threat Defense Reimage Guide
ASA→FTD: Firepower 1000 or 2100 Appliance Mode