To Next PageTo Next Page
Need help?Do you have a question about the Cisco Firepower 1100 Series and is the answer not in the manual?
General| Model | Cisco Firepower 1100 Series |
|---|---|
| Category | Firewall |
| Storage | 120 GB SSD |
| Interfaces | 8 x 1Gbps Ethernet |
| Power Supply | AC power supply |
| Form Factor | Desktop |
| Memory | 8 GB |
| Dimensions (H x W x D) | 1.73 x 17.5 x 11.5 in (4.4 x 44.5 x 29.2 cm) |
| Operating Temperature | 0 to 40°C (32 to 104°F) |
| Storage Temperature | -4°F to 149°F (-20°C to 65°C) |
| Humidity | 10% to 90% (non-condensing) |
Details the Cisco Firepower 1100 series security appliances and their capabilities.
Lists the items included in the Firepower 1100 series package.
Explains the purpose and location of the QR code sticker on the chassis.
Describes how to find the serial number and model information on the compliance label.
Describes the front panel of the Firepower 1100 series chassis.
Describes the rear panel of the Firepower 1100 series chassis.
Explains the LEDs located on the rear panel of the chassis.
Provides detailed hardware specifications for the Firepower 1100 series.
Lists the field-replaceable PIDs for the Firepower 1100 series.
Details the supported power cords for the Firepower 1100 series.
Provides critical warnings and safety instructions for installation.
Offers guidelines for safe installation and handling procedures.
Advises on electrical safety precautions during installation.
Details procedures to prevent Electrostatic Discharge (ESD) damage.
Discusses considerations for the operating environment.
Provides factors to consider for site planning and environment.
Outlines important points regarding power supply setup.
Discusses optimal setup for rack mounting.
Guides on how to unpack and check the chassis for damage or missing items.
Details the process of mounting the chassis into a rack.
Instructions for connecting to the console port using Windows.
Instructions for connecting to the console port using Mac OS X.
Instructions for connecting to the console port using Linux.
Step-by-step guide for replacing the Solid State Drive (SSD).
Procedure for installing the FIPS opacity shield in a two-post rack.
