Cisco Firepower 1100 Series User Manual

mounting process fails, and you receive an error message. You can enter the command format
disk1: to format the partition to FAT-32 and mount the partition to disk1 again; however, data might
be lost.
Package Contents
The following figure shows the package contents for the Firepower 1100 series. Note that the contents are
subject to change, and your exact contents might contain additional or fewer items.
There are three sets of four screws that you can use to secure the chassis to your rack. Chose the screws that
fit your rack.
Note
Figure 2: Firepower 1100 Package Contents
USB console cable
Type A to Mini Type B (part number 53-1977-01)
2Chassis1
Four 10-32x0.75"L Phillips screws (part number
48-0441-01) for securing the chassis to your rack
4Power cord3
Four M6x1x19mmL Phillips screws (part number
48-101022-01) for securing the chassis to your
rack
6Four 12-24x0.75"L Phillips screws (part number
48-0440-01) for securing the chassis to your rack
5
Cisco Firepower 1100 Series Hardware Installation Guide
5
Overview
Package Contents

Cisco Firepower 1100 Series Specifications

General

Brand	Cisco
Model	Firepower 1100 Series
Category	Firewall
Language	English