To Next PageTo Next Page
Need help?Do you have a question about the Cisco Firepower 2120 and is the answer not in the manual?
General| Form Factor | 1RU |
|---|---|
| Memory | 16 GB |
| Operating Temperature | 32 to 104°F (0 to 40°C) |
| Maximum Concurrent Sessions | 2, 000, 000 |
| Maximum Connections | 2 million |
| Management Ports | 1 x 1G management port |
| Storage | 480 GB SSD |
| Power Supply | Dual, hot-swappable power supplies |
| Interfaces | 8 x 1GE, 8 x 1GE SFP |
Details features of the Cisco Firepower 2100 series appliance, including models and specifications.
Describes various ways to deploy the Firepower 2100 security appliance as a firewall, threat device, or VPN device.
Lists the items included in the Firepower 2110/2120 and 2130/2140 package contents.
Explains where to find the serial number on the Firepower 2100 series chassis.
Illustrates and labels the front panel components of the Firepower 2110/2120 and 2130/2140.
Describes the status and meaning of the LEDs on the front panel of the security appliance.
Shows and labels the rear panel components for the Firepower 2110/2120 and 2130/2140.
Details the network module slot and supported modules for the Firepower 2130 and 2140.
Explains the power supply modules for Firepower 2110/2120 and 2130/2140, including specs.
Describes the fixed and hot-swappable fans in the Firepower 2100 series appliances.
Covers the SSD slots, types, and usage for Malware Storage Pack (MSP).
Lists supported SFP and SFP+ transceivers and their port compatibility.
Provides detailed hardware specifications for all Firepower 2100 series models.
Important safety and installation guidelines to follow before setting up the appliance.
General safety advice for installing and working with the security appliance.
Guidelines for safely working with electrical components and preventing electrical accidents.
Procedures to prevent damage to electronic components from electrostatic discharge (ESD).
Considerations for the operating environment to ensure proper appliance function and avoid failures.
Planning advice for the operating environment, focusing on heat, airflow, and ESD prevention.
Factors to consider regarding power at the installation site and power supply requirements.
Guidelines for configuring equipment racks to ensure proper ventilation and airflow for the appliance.
Step-by-step instructions for physically mounting the Firepower 2100 chassis in a rack.
Procedure for properly grounding the Firepower 2100 chassis for safety and protection.
Steps to connect necessary cables, power on the appliance, and verify its basic functionality.
Procedure for removing and replacing network modules in Firepower 2130/2140.
Steps for removing and replacing Solid State Drives (SSDs) in the appliance.
Instructions for removing and replacing power supply modules in the appliance.
Procedure for connecting a DC power supply module to the Firepower 2100 series.
Method to secure the power supply module's power cord to prevent accidental removal.
Guide for removing and replacing the fan tray in the Firepower 2130 and 2140.
Instructions for installing optional cable management brackets on the appliance.
