Cisco Firepower 1100 Series User Manual

DescriptionPID
Cisco Firepower 1150 NGFW applianceFPR1150-NGFW-K9
Cisco Firepower 1100 series 200-GB driveFPR1K-RM-SSD200
Cisco Firepower 1100 series 200-GB drive (spare)FPR1K-RM-SSD200=
Cisco Firepower 1100 series cable-management
brackets
FPR1K-CBL-MGMT
Cisco Firepower 1100 series cable-management
brackets (spare)
FPR1K-CBL-MGMT=
Cisco Firepower 1100 series accessory kitFPR1K-RM-ACY-KIT
Cisco Firepower 1100 series rack-mount brackets
(spare)
FPR1K-RM-BRKT=
Cisco Firepower 1100 series FIPS kitFPR1K-RM-FIPS-KIT
Power Cord Specifications
Each power supply has a separate power cord. Standard power cords or jumper power cords are available for
connection to the security appliance. The jumper power cords for use in racks are available as an optional
alternative to the standard power cords.
If you do not order the optional power cord with the system, you are responsible for selecting the appropriate
power cord for the product. Using a incompatible power cord with this product may result in electrical safety
hazard. Orders delivered to Argentina, Brazil, and Japan must have the appropriate power cord ordered with
the system.
Only the approved power cords or jumper power cords provided with the chassis are supported.
Note
The following power cords are supported.
Figure 9: Argentina (CAB-ACR)
Cord set rating: 10 A, 250 V2Plug: VA20731
Cisco Firepower 1100 Series Hardware Installation Guide
13
Overview
Power Cord Specifications

Cisco Firepower 1100 Series Specifications

General

Brand	Cisco
Model	Firepower 1100 Series
Category	Firewall
Language	English