Cisco Firepower 1100 Series User Manual

Table 1: Firepower 1120, 1140, and 1150 Features
115011401120Feature
The following certifications apply to the 1120 and 1140. The 1150 has not yet
been qualified for these certifications:
• Common Criteria (CC) on FTD 6.4.x and FX-OS 2.6.x
• Federal Information Processing Standards (FIPS) 140-2 on FTD 6.4.x and
FX-OS 2.6.x
• Department of Defense Information Network Approved Product List (DoDIN
APL)
• US Government Compliance for IPv6 (USGv6) on FTD 6.4.x
See the "Security Certifications Compliance" chapter in the Firepower
Management Center Configuration Guide, Version 6.7 for the FMC procedures
to enable security modes.
Security standards
certifications
1 RUForm factor
Rack mount
4-post Electronic Industries Association (EIA)-310-D rack
Mounting
Front panel to rear panel (cold aisle to hot aisle)Airflow
One 16-core Intel CPU
One 12-core Intel CPUProcessor
32-GB DDR4 DRAM16-GB DDR4 DRAMMemory
One Gigabit Ethernet RJ-45 10/100/1000 BaseT
Restricted to network management access only
Management port
One RJ-45 or one USB Mini B
Provides management access through an external system
Console ports
One USB 3.0 Type A
Allows attachment of an external device such as mass storage
USB port
Eight Gigabit Ethernet RJ-45 10/100/1000 BaseT
Each RJ-45 (8P8C) copper port supports auto Medium Dependent Interface
Crossover (MDI/X) as well as auto-negotiation for interface speed, duplex, and
other negotiated parameters, and are MDI/X-compliant.
Port numbering is left to right, top to bottom; ports are named Gigabit Ethernet
1/1 through 1/8. Each port includes a pair of LEDs, one each for connection status
and link status.
Network ports
Cisco Firepower 1100 Series Hardware Installation Guide
2
Overview
Features

Cisco Firepower 1100 Series Specifications

General

Brand	Cisco
Model	Firepower 1100 Series
Category	Firewall
Language	English