115011401120Feature
Four fixed 1-Gb SFP ports
Two of the
SFP ports
(ports 9 and
11) support 10
Gbps.
Note
Four fixed 1-Gb SFP portsSmall form-factor
pluggable (SFP) ports
• SFP-10G-SR
• SFP-10G-LR
• SFP-10G-ER
• SFP-10G-SR-S
• SFP-10G-LR-S
• SFP-10G-ZR-S
• SFP-10G-ER-S
• SFP-H10GB-CU
1M/1-5M/2M/
2-5M/3M/5M
• SFP-H10GB-ACU
7M/10M
• SFP-10G-AOC
1M/2M/3M/
5M/7M/10M
• GLC-SX-MMD
• GLC-LH-SMD
• GLC-EX-SMD
• GLC-ZX-SMD
• GLC-T/TE
The SPFs are hot-swappable.
Supported SFPs
Yes
On rear panel; standard rocker-type power on/off switch
The power switch controls system power and operates as a soft
notification switch that supports the graceful shutdown of the system.
Graceful shutdown reduces the risk of system software and data
corruption.
Note
Power switch
A small recessed button that if pressed for longer than three seconds resets the
chassis to its default state following the next reboot. Configuration variables are
reset to factory default. However, the flash is not erased, and no files are removed.
Reset button
One fixed AC power supply
The power supply is internal; there is no user access.
The power supply is not field-replaceable; you must return the chassis to Cisco
for power supply replacement.
AC power supply
Cisco Firepower 1100 Series Hardware Installation Guide
3
Overview
Features
To Next Page
Loading...
Need help?
General
