To Next PageTo Next Page
Need help?Do you have a question about the Cisco FPR1140-NGFW-K9 and is the answer not in the manual?
General| Model | FPR1140-NGFW-K9 |
|---|---|
| Category | Security System |
| Storage | 120 GB SSD |
| Humidity | 10% to 90% non-condensing |
| Type | Next-Generation Firewall |
| New Connections Per Second | 30, 000 |
| Interfaces | 8 x 1GE |
| Memory | 8 GB |
| Operating Temperature | 32 to 104°F (0 to 40°C) |
| Storage Temperature | -4 to 158°F (-20 to 70°C) |
| Form Factor | 1U Rackmount |
Introduction to the Cisco Firepower 1100 series security appliances.
Details the capabilities and features of the Cisco Firepower 1100 series security appliances.
Lists the items included in the Firepower 1100 series package.
Explains the purpose and location of the QR code sticker on the chassis.
Explains where to find the serial number and model information on the compliance label.
Describes the front panel of the Firepower 1100 series, noting the absence of connectors or LEDs.
Introduces the rear panel and refers to LEDs and features for descriptions.
Details the LEDs on the rear panel of the Firepower 1100 series and their states.
Provides detailed hardware specifications for the Firepower 1100 series models.
Lists the field-replaceable Product IDs (PIDs) for the Firepower 1100 series.
Details the power cord specifications and supported power cords for the Firepower 1100 series.
Outlines the initial steps and considerations before installing the chassis.
Lists important safety warnings and definitions related to installation procedures.
Provides guidelines for safe handling and installation practices.
Emphasizes precautions to take when working with electrical components.
Explains the risk of ESD and procedures to prevent damage to electronic components.
Discusses planning for an acceptable operating environment to avoid equipment failures.
Offers advice for planning an acceptable operating environment for the chassis.
Provides guidance on power supply requirements and site preparation for the chassis.
Offers advice on planning a rack configuration for the chassis.
Details the steps for removing the chassis from its packaging and checking for damage.
Provides instructions for installing the chassis into a rack using the provided brackets.
Instructions for connecting the console port using a Microsoft Windows operating system.
Instructions for connecting the console port using a Mac OS X operating system.
Instructions for connecting the console port using a Linux operating system.
Details the steps required to replace the Solid State Drive (SSD) in the chassis.
Instructions for installing the FIPS opacity shield and tamper evidence labels.
