Cisco Meraki MX67

MX67/MX68 Installation Guide
This document describes how to install and set up the MX67 and
MX68 security appliance. Additional reference documents are available
online at: www.meraki.com/library/products.
MX67/MX68 Overview
The Meraki MX67 and MX68 are enterprise security appliances
designed for distributed deployments that require remote administration.
It is ideal for network administrators who demand both ease of
deployment and a state-of-the-art feature set. A full overview of the
appliances' features can be found in the MX67 and MX68 Overview and
Specifications.
Package Contents
In addition to the MX device, the following are provided:
MX67/MX68 MX67W/MX68W
Power Adapter (No Power Cable) Power Adapter (No Power Cable)
2x CAT5 Ethernet Cables 2x CAT5 Ethernet Cables
Wall Screws and Anchors Wall Screws and Anchors
2x WiFi Antennae
MX67C MX68CW
Power Adapter (No Power Cable) Power Adapter (No Power Cable)
2x CAT5 Ethernet Cables 2x CAT5 Ethernet Cables
Wall Screws and Anchors Wall Screws and Anchors
1

Cisco Meraki MX67 Specifications

General

Model	MX67
Category	Security System
Firewall Throughput	450 Mbps
VPN Throughput	200 Mbps
Advanced Security Throughput	250 Mbps
Maximum VPN Tunnels	50
Recommended Clients	50
LAN Interfaces	4 x GbE
802.11ac Wave 2	No
USB Interface	1 x USB 2.0
Power over Ethernet (PoE)	No
Operating Temperature	32°F to 104°F (0°C to 40°C)
WAN Interfaces	2 x GbE
Operating Humidity	5 to 95% non-condensing

Summary

MX67 MX68 Overview

Package Contents

Lists the physical items included in the package for different MX models.

Front Panels

Status Indicator

Back Panels

MX67 MX67 WMX67 C Back Panel Functions

MX68 MX68 WMX68 CW Back Panel Functions

Side Panels

MX68 MX68 WMX68 CW Side Panel Functions

Bottom Panel

Mounting Hardware

Connecting to WAN

Setting up a Static IP Address

Configure static IP address, subnet mask, default gateway, and DNS server for WAN connectivity.

Setting up a DHCP IP Address

Details how MX devices automatically obtain an IP address from upstream WAN/ISP servers.

Setting up Cellular Failover

Additional Settings

Setting VLANs

Configure VLAN tagging for WAN uplink ports to assign appropriate VLAN IDs.

Setting up a Secondary WAN Interface on the MX68

Details configuring a second dedicated internet port on MX68 devices.

Setting up a Secondary WAN interface on the MX67

Explains how to toggle the LAN2 port for secondary WAN connectivity on MX67.

Setting PPPoE

Steps for configuring PPPoE authentication for DSL circuits with necessary credentials.

Web Proxy Settings

Configure web proxy settings for HTTP fallback communication with the Cloud Controller.

Configuring Physical Link Settings

Adjust physical link settings on Ethernet ports like duplex and data rates.