Cisco Meraki MX68CW

MX67/MX68 Installation Guide
This document describes how to install and set up the MX67 and
MX68 security appliance. Additional reference documents are available
online at: www.meraki.com/library/products.
MX67/MX68 Overview
The Meraki MX67 and MX68 are enterprise security appliances
designed for distributed deployments that require remote administration.
It is ideal for network administrators who demand both ease of
deployment and a state-of-the-art feature set. A full overview of the
appliances' features can be found in the MX67 and MX68 Overview and
Specifications.
Package Contents
In addition to the MX device, the following are provided:
MX67/MX68 MX67W/MX68W
Power Adapter (No Power Cable) Power Adapter (No Power Cable)
2x CAT5 Ethernet Cables 2x CAT5 Ethernet Cables
Wall Screws and Anchors Wall Screws and Anchors
2x WiFi Antennae
MX67C MX68CW
Power Adapter (No Power Cable) Power Adapter (No Power Cable)
2x CAT5 Ethernet Cables 2x CAT5 Ethernet Cables
Wall Screws and Anchors Wall Screws and Anchors
1

Cisco Meraki MX68CW Specifications

General

Brand	Cisco
Model	Meraki MX68CW
Category	Security System
Language	English

Summary

Status Indicator

MX67 MX67 WMX67 C Back Panel Functions

SIM Card Slot (MX67 C)

Allows insertion of SIM cards for cellular capabilities.

WAN Internet Port Function

MX68 MX68 WMX68 CW Back Panel Functions

WAN Internet Port Functions

LAN Port Functions

PoE+ Port Functions

MX68 MX68 WMX68 CW Side Panel Functions

SIM Card Slot (MX68 CW)

USB Port Functions

USB 2.0 for 3G/4G wireless cards; traffic status indicated by LED.

Mounting Hardware

Connecting to WAN

Setting up a Static IP Address

Configures basic connectivity and networking parameters using a static IP assignment.

Setting up a DHCP IP Address

Configures the device to obtain an IP address automatically from upstream WAN/ISP servers via DHCP.

Setting up Cellular Failover

Additional Settings

Setting VLANs

Setting up a Secondary WAN Interface on the MX68

Setting up a Secondary WAN Interface on the MX67

Setting PPPoE

Web Proxy Settings

Configuring Physical Link Settings