Cisco Firepower 2110 Deployment Guide

Figure 2: Firepower 1100 Cabling
Figure 3: Firepower 2100 Cabling
6. Observe the Stauts/SYS LED light pattern on the device to determine if the device has reached the Cisco
cloud. The table below provides the LED light patterns and the approximate time they occur. It may take
a little more time or a little less time for the Firepower device to reach the Cisco cloud based on network
conditions and the Firepower model you are working with.
Time this ocurs after the
device is powered on.
(minutes:seconds)
DescriptionLight pattern of Stauts/SYS LED
01:00The device is booting up
correctly.
Fast flashing green
01:00The device failed to boot
correctly.
Fast flashing amber
10:00The application is loaded on the
device.
Solid green
Firepower Easy Deployment Guide for Cisco Firepower 1000 or 2100 Firewalls
3
Firepower Easy Deployment Guide for Cisco Firepower 1000 or 2100 Firewalls
Connect a New Cisco Firepower Firewall to Your Network

Cisco Firepower 2110 Specifications

General

Brand	Cisco
Model	Firepower 2110
Category	Firewall
Language	English