Cisco IP DECT 6823 User Manual

New or Changed ContentFeature
New troubleshooting procedure in Handset Beeps
Continuously While in the Charger, on page 93
General Changes
New and Changed Information for Firmware Release 4.7
Starting with this release:
• The release number scheme changes to conform to the standard Cisco release numbers. Internally, the
previous number scheme will display. Firmware Release 4.7 and Firmware Release V470 B6 are the
same firmware release.
• All document updates related to the release are clearly marked. For example, if there is a new field added
or a field removed, the documentation will indicate the type of change and what release the change applies
to.
New and Changed InformationFeature
Updated Your Handset, on page 1
Updated Buttons and Hardware, on page 8
6825 Ruggedized Handset support
Add information about the out-of-range alert to Your
Handset, on page 1.
Add information about the Alarm screen display for
recurrent alarms to Alarm Clock, on page 63.
User Interface Enhancements
New troubleshooting procedures Handset Won't Stay
On, on page 92 and Handset Won't Turn On, on page
91
Other changes
New and Changed Information for Firmware Release V460
New or Updated SectionsFeature
Updated Call a Central Directory Contact, on page
58
Broadsoft All directory
Updated Automatic Handset Configuration, on page
28
New task Set Up Your Handset Automatically, on
page 29
Handset out-of-box enhancements
Cisco IP DECT 6800 Series User Guide
5
Your Handset
New and Changed Information for Firmware Release 4.7

Cisco IP DECT 6823 Specifications

General

Brand	Cisco
Model	IP DECT 6823
Category	Handsets
Language	English