Cisco IP DECT 6823 User Manual

Table 2: 6825 Handset and 6823 Handset Buttons and Hardware
DescriptionName or GroupingItem
Indicator light—Use the light to identify states. You
can configure the event that triggers the red, yellow,
or green LED.
Indicator light (LED)1
Emergency Raises an emergency alarm,
if configured.
This button isn't available in the 6823 Handset.
Emergency button2
Headset port with cover . Remove the protective
cover and plug in a headset or ear buds (3.5 mm audio
jack).
Headset port3
Softkeys Activate the option
displayed on the screen.
Speaker Toggle the speaker mode on or off for
the handset.
Menu Access directories, settings, status, and
other information.
Navigation cluster Navigation ring and Select
button:
• Navigation ring (outer ring): Move up, down,
left, or right.
• Select button (center of the cluster): select
a menu item.
Answer/Send Answer a ringing call or, after
dialing a number, press to place the call.
Power/End Turn the handset on or off, or end
a connected call. In menus, the button returns you to
the previous screen.
Softkeys, handset control buttons
(Speaker, Menu), Navigation
cluster, call control buttons
(Answer/Send, Power/End).
4
Cisco IP DECT 6800 Series User Guide
9
Your Handset
Buttons and Hardware

Cisco IP DECT 6823 Specifications

General

Brand	Cisco
Model	IP DECT 6823
Category	Handsets
Language	English