Cisco Linksys E4200 - Chapter 2: Advanced Configuration

3.2 Buttons, Ports and Label
3.2.1 Buttons
x Reset button to be recessed and located on the back of the unit
x Wi-Fi Protected Setup button to be recessed and located on the back of the unit
3.2.2 Ports
x One power port
x One Gigabit Internet port
x Four Gigabit switch Ethernet LAN ports
x One USB port
x Power switch
3.2.3 Label
x Label are clearly marked
x No Obstruction for the back ports and button
3.3 LED Status
LED Color(s) Activity Description
Off Power Off
White blinking Booting / System Self-Test / Firmware upgrade
Blue on Power On / Device Ready, WPS is successful
Blue blinking WPS is in progress
Amber blinking WPS PBC session overlap is detected
Power
White/Amber
/Blue
Amber on WPS is error, after 120 seconds then back to original
Off No connection on LAN port
Green on Connecting to a 10/100/Gigabit link
LAN
(1-4 ports)
Yellow/Green
Yellow blinking Data transfer in 10/100/Gigabit network
Off No connection on LAN port
Green on Connecting to a 10/100/Gigabit link
Internet
Yellow/Green
Yellow blinking Data transfer in 10/100/Gigabit network